This multimeter, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. This multimeter would include basic features such as the ability to measure voltage, current, and resistance. This digital multimeter (DMM, DVOM) displays the measured value in numerals and it can be used to troubleshoot electrical problems in a wide array of industrial and household devices such as electronic equipment, motor controls, domestic appliances, power supplies, and wiring systems. This Digital multitester is a must have testing tool for your tool box, shed, garage, car trunk, etc. Its portability enables you to be able to take it with you wherever you go, and provides you with a multitude of features that helps you achieve the best results every time. This digital device has a 1.8 inch LCD display therefore you can clearly read the measurement. As a voltmeter, this tool can measure the amount of AC or DC voltage flowing through a circuit. Voltage is a difference in potential energy between the two points. In all types of multimeters, the quality of the switching elements is critical to stable and accurate measurements. General Material: Hard Molded ABS Casing On Board Buttons: Power, Light, Hold Battery Test: Range 1.5V (Resolution 41.1mA, Accuracy = +/- 1.8%of rdg + 2 Digits), Range 1.5V (Resolution 1.5V, Accuracy = +/- 1.3%of rdg + 2 Digits, Range 3V (Resolution 3V, Accuracy = +/- 1.3%of rdg + 2 Digits), Range 9V (Resolution 9V, Accuracy = +/- 1.3%of rdg + 2 Digits), Range 24V (Resolution 24V, Accuracy = +/- 1.3%of rdg + 2 Digits) Transistor hFE Test: Range NPN, PNP, Test Range 0-1000, Test Current/Voltage, Ib=10uA/Vce=3V Diode Test: Resolution 1mV, Function Display: Read approximate forward voltage of diode Respond: Average, Calibrated in RMS of Sine Wave Input Impendence: 10M (Ohms) Frequency Range: 40 to 400Hz Forward DC Current: Approximate 1mA Reversed DC Voltage: Approximate 3.0V Continuity: Built-in buzzer wikII sound if Resistance is less than 50 (Ohms) Overload Protection: 250V DC or RMS AC, F200mA/250V Fuse, 250V for 200mV Range, Effective DC or AC 600V for Other Ranges Kick Stand Power Source: 9V Battery (Included) DC/AC Current and Voltage DC Voltage: Range 200mV (Resolution - 0.1mV, Accuracy = +/- 0.5% of rdg + 2 digits), Range 2V (Resolution 1mV, Accuracy = +/- 0.5% of rdg + 2 digits), Range 20V (Resolution 10mV, Accuracy = +/- 0.5% of rdg + 2 digits), Range 200V (Resolution 100mV, Accuracy = +/- 0.8% of rdg + 3 digits), Range 600V (Resolution 1V, Accuracy = +/- 0.8% of rdg + 3 digits) DC Current: Range 200uA (Resolution 0.1uA, Accuracy = +/- 1.0% of rdg + 2 digits), Range 2mA (Resolution 1uA, Accuracy = +/- 1.0% of rdg + 2 digits), Range 2mA (Resolution 10uA, Accuracy = +/- 1.0% of rdg + 2 digits), Range 200mA (Resolution 100uA, Accuracy = +/- 1.5% of rdg + 2 digits), Range 2A (Resolution 1mA, Accuracy = +/- 3% of rdg + 2 digits), Range 10A (Resolution 10mA, Accuracy = +/- 3% of rdg + 2 digits) AC Voltage: Range 200mV (Resolution 100uV, Accuracy = +/- 1.0% of rdg + 10 digits), Range 2V (Resolution 1mV, Accuracy = +/- 1.0% of rdg + 10 digits), Range 20V (Resolution 10mV, Accuracy = +/- 1.0% of rdg + 10 digits), Range 200V (Resolution 100mV, Accuracy = +/- 1.2% of rdg + 10 digits), Range 600V (Resolution 1V, Accuracy = +/- 1.0% of rdg + 10 digits) AC Current: Range 200uA (Resolution 0.1uA, Accuracy = +/- 1.8% of rdg + 5 digits), Range 2000mA (Resolution 1uA, Accuracy = +/- 1.8% of rdg + 5 digits), Range 20mA (Resolution 10uA, Accuracy = +/- 1.8% of rdg + 5 digits), Range 200mA (Resolution 100uA, Accuracy = +/- 2.5% of rdg + 5 digits), Range 2A (Resolution 1mA, Accuracy = +/- 3% of rdg + 15 digits), Range 10A (Resolution 10mA, Accuracy = +/- 3% of rdg + 15 digits), Range 20 (Ohms) (Resolution 0.01 (Ohms), Accuracy = +/- 3.0% of rdg + 20 digits), Range 200 (Ohms) (Resolution 0.1 (Ohms), Accuracy = +/- 0.8% of rdg + 3 digits), Range 2K (Ohms) (Resolution 1 (Ohms), Accuracy = +/- 0.8% of rdg + 3 digits), Range 20K (Ohms) (Resolution 10 (Ohms), Accuracy = +/- 0.8% of rdg + 3 digits), Range 200K (Ohms) (Resolution 100 (Ohms)), Range 20M (Ohms) (Resolution 1K (Ohms), Accuracy = +/- 1.0% of rdg + 3 digits), Range 20M (Ohms) (Resolution 10K (Ohms), Accuracy = +/- 1.5% of rdg + 3 digits) Display Display Size: 1.8 Inch LCD Backlight Non Touchscreen Dimensions Main product dimensions: 144x70x35mm (L x W x D) Product Notes Portable and versatile, easy to carry around and fits neatly in your tool bag Perfect for home DIY enthusiast as well as professional electricians and engineers Please Note that the 10A range is not fused Package Contents Digital Multimeter Test Cables User Manual Battery Pricing terms: This price just cover the cost of product and freight to your address, not cover the tax or tariff which charged by your local government.

20.99 USD InStock